Changes from version 5.40 to version 5.70:

• Added new Fleet Management Interface features.
• Fixed Fleet Management Interface errors.
• Added support for Maged, a new Arabic text-to-speech voice language.
• Fixed an error that caused TrafficMaster UK subscription to display as 'New Subscription' when using a GTM 25.
• Fixed map display errors.
• Fixed POI search errors.
• Fixed route calculation and display errors.
• Fixed an error that caused location information to not appear on the Go! page for certain Points of Interest.

Changes from version 5.30 to version 5.40:

• Fixed an error that sometimes caused the loss of audio and Bluetooth after a software update.
• Improved software stability.

Changes from version 5.20 to version 5.30:

• Fixed an error that caused some third-party maps to draw incorrectly.

Changes from version 5.10 to version 5.20:

• Made several map-drawing improvements.
• Fixed several FMI-related issues.
• Fixed an error that caused the wrong keyboard to display for certain regions.
• Fixed an error that caused audio and Bluetooth features to not function unless the unit was restarted.
• Fixed an error that caused the device to prompt users to turn the wrong direction on certain routes.
• Fixed an error that caused routes to calculate slowly.
• Changes from version 5.00 to version 5.10:
• Added Brazilian Portuguese Language Support.
• Corrected Greek Language Support.

Changes from version 4.90 to version 5.00:

• Added support 'Recommended by Mapa' on extended listing Points of Interest in Israel.
• Added support for mobile safety cameras in Russia and corrected an issue displaying the full safety camera text.
• Corrected several FMI-related issues.
• Corrected several issues with ecoRoute HD.
• Corrected several issues with the Language Guide.
• Corrected an issue that prevented addresses with letters in them from displaying properly when typed in the keyboard.
• Corrected an issue displaying the full text for Safety Cameras.
• Corrected an issue that caused screen flicker on the wide screen unit displays.
• Improved stability.

Changes from version 4.70 to version 4.90:

• Fixed issue with junction view files not updating properly during a map update.
• Fixed issue with audio intermittently not working.
• Fixed issue with Australia Topo map turning off the unit in certain conditions.

Changes from version 4.60 to version 4.70:

• Added support for GTM26/GTM36 accessory.
• Corrected an issue that sometimes made an ad unreadable.
• Corrected an issue with Loc8 Zone B.
• Corrected an issue where Convenience stores would show under Fuel category on Europe 2011 maps.

Changes from version 4.50 to version 4.60:

• Fixed an issue where the Fleet Management Interface Estimated Time of Arrival can be off.
• Added unlock support for loc8 files.

Changes from version 4.40 to version 4.50:
IMPORTANT: If your device is running software versions 4.30 or 4.40 your favorites will be erased with this update. Please click here to learn how to back up your favorites.

• Fixed a problem in software versions 4.30 and 4.40 with Favorites after a software upgrade.
• Corrected a problem related to starting up the unit in mass storage mode.
• Improved software updating process from update cards and GCD files.
• Added location of Language Guide files.

Changes from version 4.20 to version 4.40:

• Added Loc8 Postal Code functionality for Ireland.
• Corrected issue that could cause unit to remain stuck on copyright screen.
• Corrected issue that could cause unexpected shutdown when satellite reception is temporarily lost.

Changes from version 4.10 to version 4.20:

• Added support for Luxembourg and Netherlands traffic and safety cameras.
• Improved ecoRoute accessory connection handling.

Changes from version 4.00 to version 4.10:

• Added support for the ecoRoute HD accessory.
• Corrected an issue that can cause the unit to turn off and not resume until the power button is held for 10 seconds.
• Corrected an issue that sometimes made it impossible to select a country during an address search.
• Corrected an issue so a via point can now be inserted between the current location and first via point in the 1400 series route planner.
• Corrected several issues with Bluetooth connections.
• Corrected an issue where the unit would ask for the Garmin Lock pin when connected to a computer if the pin was previously entered.
• Corrected traffic on the opposite side of a highway generating traffic warnings.
• Corrected an issue that could cause the Area C warning to not display properly when using Israeli maps.
• Corrected to slightly increase the time before a loss of external power is determined to avoid false external power lost messages.
• Corrected the ecoChallenge score to no longer display in bicycle mode.
• Corrected the unit converter so it will no longer allow multiple decimal points.
• Corrected incorrect handling of percent functions on the calculator.
• Added support for fleet management interface 40 Data Cable for North America

Changes from version 3.90 to version 4.00:

• Corrected an issue that can cause the unit to hang on startup. *NOTE: This update will delete the contents of the GPX\GPX folder on the unit, which contains trip log archives.

Changes from version 3.70 to version 3.90:

• Corrected an issue that can improve performance with traffic information.

Changes from version 3.60 to version 3.70:

• Corrected an issue that could cause the text language selection to revert to American English with older Traffic translations.
• Corrected issues with the fleet management interface.

Changes from version 3.40 to version 3.60:

• Added Garmin Language Guide support
• Added Bus Station, Train Station and Commuter Rail into Points of Interest->Transit Category
• Added support for Fleet Management
• Corrected an issue that could cause breaks in Trip logs
• Improved city search when using cityXplorer maps
• Corrected possible shutdowns when connected to Traffic receiver and navigating
• If Garmin lock is enabled then the nuvi will not go to USB Mass Storage mode unless the pin is entered
• Corrected possible shutdown after viewing multiple Junction Views along a route
• Bluetooth microphone will be un-muted automatically after a call if muted during that call
• Corrected miscellaneous issues with Right to Left language display
• Corrected some issues with Russian Maps
• ecoRoute statistics will not display in Bicycle and Pedestrian modes on power off
• Corrected possible freeze when cancelling an intersection search
• Corrected an issue that could cause a Pedestrian route to not calculate correctly
• Corrected an issue that could cause a shutdown with 7 lanes in lane assist
• Corrected an issue that could cause multiple 'Saved to Favorites' windows

Changes from version 3.30 to version 3.40:

• Enhanced ecoRoute experience.
• Stop button now allows cancellation of a route calculation on the main page.
• Corrected an issue where some roundabouts would not show the roundabout icon.
• Corrected city search when using the World Clock to display all cities, not just those for which detailed maps are available.
• Corrected behavior of the vehicle selection page.
• Added a timeout for Bluetooth connections.
• Corrected text alignment issues in right to left languages.
• Fixed a shut down that could occur if searching for an intersection.
• Added ability to change the phone number of built in Points of Interest.
• Corrected unexpected behavior when adding a stop to a route in the 1400 series.

Changes from version 3.20 to version 3.30:

• Corrected cityXplorer maps disappearing after a map update.
• Corrected lane guidance not appearing on longer routes.
• Corrected issue where audio may not work at startup until the volume is adjusted.
• Corrected an issue that could cause building footprints to not display in certain third party maps.
• Enhanced reliability of Bluetooth pairing.

Changes from version 3.00 to version 3.20:

• Correct items overlapping on the map.
• Correct display of additional content in GPI data.
• Make phone number in GPI content dialable.
• All user favorites are now shown in the list (not just nearest 50).
• Correct some connection issues in public transit navigation.
• Correct issue that sometimes changed automotive routes to pedestrian routes after off-route recalculation.
• Correct issue that sometimes caused automotive routes to change to point to point routes after power cycle.
• Correct issues with Bluetooth audio and pairing.
• Correct issue that could cause unit to shutdown with very large phonebook transfers.

Changes from version 2.70 to version 3.00:

• Correct issue installing Map Updates on a Mac.
• Correct issue maintaining more than 128 favorites. Warning - this software update may require favorites to be reloaded.
• Correct issue with deleting 2-5 letter POIs.
• Correct issue with MSN receiver software failing to download.
• Correct backlight settings handling.
• Correct ecoRoute challenge score accumulating in charge mode.
• Correct problems with right to left language display.
• Correct issues where the map navigation bar information could get cut off or appear extremely small.
• Correct issue where the text language did not change when selected.
• Correct issue with lane assist when there were more than 7 lanes.
• Correct units selection for the UK.
• Correct issues with international dialing

Changes from version 2.60 to version 2.70:

• Added ability to provide star ratings for built in Points of Interest.
• Added ability to close built in Points of Interest.
• Improved usability of Bluetooth features.
• Improved Custom POI handling.
• Correct potential shutdown issue due to proximity/speed alerts.